My first attempt for orgonite crystal amp

Discussion of Orgone, "Orgonite", Orgone matrix material, cloud busters, HHG's, Wilhelm Reich, etc.
c_hasbeen
Posts: 4
Joined: Wed Jan 27, 2016 12:08 am

My first attempt for orgonite crystal amp

Postby c_hasbeen » Wed Jan 27, 2016 1:57 am

Hi!
I decided to make an orgonite crystal amplifier like the one Adam used in the three knob unit in a bakelite box, I went on a search for something to make the orgone in and found a silicone mold for cupcakes of sort, it makes the cup cake like a shot glass.
I was thinking that I would wind mag wire around the center piece then pit it inside of the cup part.
I made the orgone out of bondo fiberglass, and I have qute a lot of soft lead, and some brass wool.
I mixed up 4 molds, the first night I did the center parts, then followed up the following evening doing the cup portion while leaving the center in place to help hold the form solid.
I took a rasp and filed the lead, and cut up the wool with scissors.
here are a couple of pictures, I think when I have my wire wound on the center piece I will take some organic tong oil and brush over it to hold it in place when I set it back inside the other piece.
feels right to me as I started doing this.
thoughts?

I did not put any crystal in the mix, I was thinking that I would put it on top with a piece of brass like the one I was looking at that started all this.
the lead is in the bottom, I was not sure if it should be up or down.
Like I say I only know enough to know I don't really know! :)
Attachments
Orgone Generator  (2) (Medium).jpg
Orgone Generator (2) (Medium).jpg (71.08 KiB) Viewed 3688 times
Just call me `C
Beginner radionics builder kind of a person

c_hasbeen
Posts: 4
Joined: Wed Jan 27, 2016 12:08 am

Re: My first attempt for orgonite crystal amp

Postby c_hasbeen » Wed Jan 27, 2016 10:48 pm

one more picture
Attachments
Orgone Generator  (1) (Medium).jpg
Orgone Generator (1) (Medium).jpg (61.92 KiB) Viewed 3685 times
Just call me `C
Beginner radionics builder kind of a person

c_hasbeen
Posts: 4
Joined: Wed Jan 27, 2016 12:08 am

Re: My first attempt for orgonite crystal amp

Postby c_hasbeen » Wed Jan 27, 2016 10:50 pm

ok, One more and I will stop :)
Attachments
Orgone Generator  (8) (Medium).jpg
Orgone Generator (8) (Medium).jpg (50.99 KiB) Viewed 3685 times
Just call me `C
Beginner radionics builder kind of a person

User avatar
sorynzar
Site Admin
Posts: 1061
Joined: Mon Mar 01, 2010 5:41 pm
Location: Cambridgeshire, UK
Contact:

Re: My first attempt for orgonite crystal amp

Postby sorynzar » Sun Jan 31, 2016 6:18 pm

Good first attempt. It's not always easy getting the mix right.


Return to “Orgone”

Who is online

Users browsing this forum: No registered users and 1 guest