Making a homeopathic remedy machine

This is the general category, if you can't find a category to match your topic, this is where it belongs.
Lissalyon
Posts: 5
Joined: Mon Oct 29, 2012 12:59 pm

Making a homeopathic remedy machine

Postby Lissalyon » Wed Dec 26, 2012 12:19 am

I am absolutely clueless about anything like this, but with the cost of a remedy maker , £600 and upwards, I wanted to have a go.

Can anyone point me in the direction of an easy to follow set of instructions to have a go at making one.

Make OH says it can't be done, but I want to prove him wrong.

Thank you

User avatar
JosephMax
Posts: 418
Joined: Fri Jul 30, 2010 11:21 pm
Location: California, USA
Contact:

Re: Making a homeopathic remedy machine

Postby JosephMax » Fri Dec 28, 2012 7:59 am

Who's this "Make OH" person? He/she/it is very wrong!

Such a device can be built by a dedicated hobbyist, but a lot depends on your ability to make stuff like boxes, and being able to solder.

What remedy makers have you seen? Do you have links or photos?
•••••• Joseph Max – Aetheric Artist •••••••
•••• http://josephmax.wordpress.com ••••

User avatar
sorynzar
Site Admin
Posts: 1051
Joined: Mon Mar 01, 2010 5:41 pm
Location: Cambridgeshire, UK
Contact:

Re: Making a homeopathic remedy machine

Postby sorynzar » Fri Dec 28, 2012 12:36 pm

I agree with Joseph, a lot depends on your ability to solder. A homeopathic copier would need an amplifier circuit, and then you would need to know the potency correlation with resistance for the potentiser. It's new grounds for me, so requires a lot of research.

Lissalyon
Posts: 5
Joined: Mon Oct 29, 2012 12:59 pm

Re: Making a homeopathic remedy machine

Postby Lissalyon » Sat Dec 29, 2012 12:46 am

My daughter, s looks like a McGurk MKll remedy maker. £625 pounds

Sorry I can't post the link.

Lissalyon
Posts: 5
Joined: Mon Oct 29, 2012 12:59 pm

Re: Making a homeopathic remedy machine

Postby Lissalyon » Sat Dec 29, 2012 12:48 am


User avatar
JosephMax
Posts: 418
Joined: Fri Jul 30, 2010 11:21 pm
Location: California, USA
Contact:

Re: Making a homeopathic remedy machine

Postby JosephMax » Sat Dec 29, 2012 6:45 am

Didn't somebody over on the Radionics Facebook page post some pictures of the interior of a potentiser? I think we had worked out what the resistance values for the various remedy potencies. I'm going to go look...
•••••• Joseph Max – Aetheric Artist •••••••
•••• http://josephmax.wordpress.com ••••

User avatar
sorynzar
Site Admin
Posts: 1051
Joined: Mon Mar 01, 2010 5:41 pm
Location: Cambridgeshire, UK
Contact:

Re: Making a homeopathic remedy machine

Postby sorynzar » Sat Dec 29, 2012 2:10 pm

I have a Rae remedy maker, and the resistance values are all over the place, with regards to matching the potencies. The potencies, don't seem to follow one particular scale either, but then again I'm not well versed in the scales. I think it was one of the guys from India who posted the interior of their potentiser. It was not a copier, just a potentiser. We couldn't find a relation between the resistance values either, though you pointed out the higher resistance was equal to a higher homeopathic value as the coped remedy would be more diluted.

agentgates
Posts: 42
Joined: Sat Dec 03, 2011 3:22 am
Location: Lincolnshire, UK

Re: Making a homeopathic remedy machine

Postby agentgates » Sun Apr 27, 2014 4:06 am

Hi Everyone,

I would like to build a simple remedy copier but I don't even need the potency selection feature, just a plain copier.
Is that correct all I need is a VHF amplifier?

Many thanks in advance

User avatar
realityphantom
Posts: 156
Joined: Thu Jul 18, 2013 4:36 am

Re: Making a homeopathic remedy machine

Postby realityphantom » Sun Apr 27, 2014 11:25 pm

To duplicate one really only needs water, alcohol and a few glean glass vials. To do it with Radionics I believe you could use a non powered device..

User avatar
sorynzar
Site Admin
Posts: 1051
Joined: Mon Mar 01, 2010 5:41 pm
Location: Cambridgeshire, UK
Contact:

Re: Making a homeopathic remedy machine

Postby sorynzar » Mon Apr 28, 2014 4:55 am

As a standard powered copier with no potency control it's a simple case of INPUT ==> AMPLIFIER ==> OUTPUT


Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest