Page 1 of 1

Stick pad using

Posted: Sun Sep 23, 2018 2:58 pm
by phil
Hi everybody.
I try to use my radionic stick pad from berkana labs, but i've got some troubles to feel when i've got the stick reaction to set the dials. Does anyone had help for that ?

Friendly.

Phil

Re: Stick pad using

Posted: Mon Oct 01, 2018 8:01 pm
by sorynzar
A simple way to show the difference is to pull your finger lightly (no stick) then apply pressure to feel the grabbing (stick reaction)

When tuning you will be pulling your finger lightly then when a stick is found it will grab as if you were applying pressure.

Other ways to improve the reaction are to use a dusting of corn starch, this would be if you found the surface too sticky, keeping the surface clean and polished with the provided cloth helps, as does making sure your hands are clean and dry.

To improve sensitivity you can try a 10Hz Frequency, square waves seems to work well.

Re: Stick pad using

Posted: Tue Oct 02, 2018 9:13 am
by phil
Thanks sorynzar, i'll try it !!!

Friendly.

Phil