Berkana Path Radionics http://www.berkanapath.com/radionics your radionics & dowsing resource Thu, 21 Apr 2011 16:22:16 +0000 en hourly 1 http://wordpress.org/?v=3.3 The Vril Engine http://www.berkanapath.com/radionics/193/the-vril-engine/ http://www.berkanapath.com/radionics/193/the-vril-engine/#comments Thu, 21 Apr 2011 16:18:14 +0000 Sorynzar http://www.berkanapath.com/radionics/?p=193 The Vril Engine was developed on the back of the orgone stack project. There are several areas, which need further experimentation, such as types of eloptic conductor, and orgone insulator. We believe, that in order to gain the best form of eloptic output from the Vril Engine an organic insulator should be used. On top of this we need to discover if the separation distance of the eloptic conductor, plays a major part in determining the Vril energy output. If as suspected, it is, then a closer spacing with minimal thickness insulation would yield stronger results.

The Vril Engine uses the orgone stack technology, and regular orgone matrix tech. The orgone stack directs the eloptic energy towards the Vril Engine output device, which is then pulsed with a set square wave frequency of 7.83Hz. The solenoid is wound from the bottom of the Vril output module to the top. The frequency is then injected from the bottom of the winding, before returning at the top. This is done so that the h-field is driving the eloptic energy along its path towards the operator.

The coil is not currently present in the photographs, but that is the next phase of construction.

Two coupling electrodes are used within each orgone stack. This is purely experimental and is based on a German patent (DE19915730) The applied electric field, enhances the E-field in the eloptic insulator, in the example of these orgone stacks, the insulator is comprised of solid birch wood, still utilising the organic principals of Reich. An eloptic conductor component is made up of Zinc coated steel. The steel allows for the magnetic h-field to create a more pronounced flux, in comparison to non ferrous materials.

A high voltage input is preferable, but has not yet been tested. Even a small DC power supply will slightly alter the electron alignment in the orgone insulator material. Since there is no large scale current drain, the DC source can be supplied by batteries for a long period of time.

The combination of the E-fields, and the h-fields at 90º to one and other create a G-field, See [Aspden No.3. (2005)] for the theory of electrostatic gravity.

As an experimental process we are looking at the effects of light absorption in determining the best form of eloptic reflector to make up the conductor of the Vril Engine’s orgone stacks. It seems logical to make one side of the eloptic conductor, rough and absorbing, while the other side of the eloptic conductor should be polished and reflective.

Overall, it may turn out that an entirely transparent orgone stack may prove to be the most conducive form of eloptic capacitor for the Vril Engine. The trick is finding an affordable, transparent, and conducting solid material.

The Vril Engine is still very much a long running research project, but is due to be mounted into the core of a new psionic device. Over time, we may be successful in determining the most appropriate materials, and assembly for the orgone stacks, and possibly future versions of the Vril Engine.

 


Related Blogs

  • Related Blogs on orgone stacks
]]> http://www.berkanapath.com/radionics/193/the-vril-engine/feed/ 2 Experimental Output Module http://www.berkanapath.com/radionics/183/experimental-output-module/ http://www.berkanapath.com/radionics/183/experimental-output-module/#comments Thu, 07 Apr 2011 11:49:14 +0000 Sorynzar http://www.berkanapath.com/radionics/?p=183

Here is a design I had lying around on my computer. The ultimate goal of the module was to have it cast into a resin block about 2ft tall, with a large clear quartz crystal embedded into it. The laser is used experimentally to allow for light transfer of a radionics signal, it could also be used to pulse audio frequency into the heart of the quartz. The orgone capacitor is used to collapse the gravity field around the regular orgone matrix. While it is a crude version, the orgone capacitor is far more superior to the orgone matrix material. The capacitor needs a lot of work, and it is something which I have begun to look at under the project title of Orgone Stacks. No working version of this experimental module has ever been put together, but it is something I would like to try, if time and resources allowed.

Related Blogs

  • Related Blogs on orgone stacks
]]> http://www.berkanapath.com/radionics/183/experimental-output-module/feed/ 0 Scalar Coil Experiment http://www.berkanapath.com/radionics/171/scalar-coil-experiment/ http://www.berkanapath.com/radionics/171/scalar-coil-experiment/#comments Sun, 27 Mar 2011 15:35:40 +0000 Sorynzar http://www.berkanapath.com/radionics/?p=171 I have always had a great deal of success with the toroidal style Scalar coils, such as the like developed by Jon Logan. These fascinating coils emit an energy that has become termed scalar. In popular physics these are linked to zero spin particles such as the Boson. Theoretically, it is possible to create a scalar field by opposing two identical waves which are out of phase with one another. The black projects community term scalar generators as split phase coils. This was something, which eluded both myself, and my physics tutor, who coincidently had done her Phd on Scalar waves. Time has a strange way of combining all the pieces of the puzzle.

The coils such as the ones developed by Logan, work on the principle that a small scalar field is made when the two identical waves create a magnetic null point at the node where they become out of sync. The genius of using quadrifilar wire allows for a greater degree of nodes to be combined in one small package. One thing which I found uncanny about the quadrifilar wire that Logan uses, is its link to the Chi Knot pattern, A design which was widely used by the Celtic tribes, and Saxons in their artwork.

While impressed with the ability of the regular toroidal scalar coils, I had a niggling idea in the back of my head which I needed to experiment with. It was after reading through several physics papers, and uncovering the Russian research into torsion fields, also termed spin fields, that I came up with an idea based on entropy. I still don’t fully understand how the two are linked to my idea, but I just like to let the imagination run wild. I will briefly highlight the theory behind torsion fields.

Positive Entropy, i.e. (Evaporation of Accetone)= SR (Right Handed Torsion: Time Emission)

Negative Entropy, i.e. (Freezing of Water)= SL (Left Handed Torsion: Time Absorption)

The SR is the repulsive force, and SL is the attractive force, together they create torsion.

The idea of the two opposing forces led me to use two opposing electron flows in conjunction with the regular toroid setup. To do this, I had to wind the coil slightly different to the way Logan teaches. Instead of using one single strand of wire, I had to use two in parallel. Two 60′ lengths, gets quite difficult to manage, let me tell you!

I persisted, and taped the two lengths together at each end, folded them over, as per Logan’s method and begun to wind them. Once the coil was complete, after some considerable time, I was able to implement the theory.

The positive from one oscillator is crossed over with the negative of another. They are as accurate as can be achieved with analogue electronics, but there may be some drift. I managed to get the scopes to read equal 15Hz for each timer, but there is always a small intolerance.

The positive flow and negative flow run parallel to each other within the coil. With positive and negative flows cancelling at the nodes with the applied frequency. It may be that the parallel flow of electrons in opposite directions also has a small scalar effect, giving a performance boost to the coil.

Using a gauss meter on a traditional coil of the same Ohmic value as a base reading. I then set forth and measured the reading of the new coil. The gauss had dropped considerably, leading me to believe that a greater degree of electromotive force had become scalar, rather than magnetic. The experiment seems to have been a success. However, it will require further testing.

Edit:

One thing I would like to alter is the oscillator and amp circuit. The oscillator on its own does not output enough power for the scalar coils. In fact, the majority of the voltage is lost. By adding the power amp, the output is increased considerably. I aim to replace the power amp IC with a power transistor and configure the coil so that the reverse voltage is put back into the circuit rather than lost. This would require some testing, but it is something I have started to work on.

Related Blogs

]]> http://www.berkanapath.com/radionics/171/scalar-coil-experiment/feed/ 0 The Physics of 2012 http://www.berkanapath.com/radionics/160/the-physics-of-2012/ http://www.berkanapath.com/radionics/160/the-physics-of-2012/#comments Wed, 02 Feb 2011 17:46:53 +0000 Sorynzar http://www.berkanapath.com/radionics/?p=160

A forum member recently posted a video in response to a discussion on 2012, and channelled messages. I made a reply based on my understanding of the cosmos. So for all to see I have written my views on the subject.

2012 doomsday?

Please bear with me dear reader, My physics is slightly rusty, since I have not called upon this knowledge in many years.

A theme which keeps circling the new age community is the belief that our planet, Earth, and our star, the Sun will be facing the central sun (the logos) on or around 2012. The theory states that as we align with the central sun, a beam of energy will transmute the earth and raise souls to a higher dimension. “Hmm”, I hear some of the sceptical amongst us say. However, maybe there is some truth to this?

Galactic alignment

Drawing on my limited knowledge of astro physics and cosmology, I know that there is indeed a central sun to this galaxy, and many others, but it is not a star as we know it. Astronomers now believe, due to telescopic evidence that there is a super massive black hole lurking at the centre of our galaxy. Stars have been observed to wobble drastically as they approach the event horizon, until they vanish completely. Black holes are not completely inert, they do emit radiation. The trouble is that the particle and photons from a black hole get red shifted to the extreme, and the likelyhood of such radiation reaching earth is minimal. It is my view, However that far from being a black hole, what lurks at the centre of our galaxy, and in all others is the fabled white hole which has eluded astronomers. This white hole would be the mirror to a black hole from another universe, a potential portal to another world if the Einstein-Rosen bridge could be realised. To date, there is no astronomical evidence to point to such an alignment.

Planet X

Another hot topic of debate, something which I do not personally subscribe to, but which none the less should be looked at is “planet-x”. Many people cite the coming of a large planet through our solar system as a portent of death and destruction, which it would be due to the gravity upheaval. There has been no evidence for such an object in our solar neighbourhood. However, when doing my physics studies, there was a battered text book from the late 70′s which had a reference to a dark star on the farthest reaches of our solar system. My tutor was keen to brush over the subject as quick as possible, but from memory it was deemed a theoretical body. A dark star, more commonly known as a brown dwarf, is the remnants of a star which has burnt up its nuclear fuel, and remains as a ball of ash.

It is possible for such an object to exist in the outer reaches of our solar system, in fact, it would make our star system fit in with the majority of star systems in our galaxy, since it is quite odd just to have one star, most solar systems are binary star systems. A Spanish observatory recently discovered an object in the outer reaches of the solar system beyond Pluto, and presumably the other dwarf planets of the Kuiper belt. This object is G1.9. Whether or not it is a dark star remains to be seen. It is highly unlikely that its orbit is out of phase with our sun, in either case it will have a much lower solar mass than the sun, so will be caught in her gravity, will it make it close to Earth’s orbit? I doubt it.

My personal view of an object which caused much upheaval aeons ago was the moon which now orbits us. It stands to reason that Millions of years ago during the era of the dinosaur, Earths gravity was much more different than today. One only has to look at the size of the largest dinosaur fossils to notice the predicament. Using the scale law it may not have been possible for those creatures to have survived in an Earth environment as it is today. One conclusion I can make is that there was at least more than one moon, which would have affected gravity, thus allowing larger creatures to flourish, what happened to the other moon, or moons, I am unsure. It is probable that the loss of the extra moons orbiting earth led to chaos and upheaval.

The LHC, and a man made black hole/wormhole

It’s not going to happen. While physicists would love to create a black hole in the lab, the LHC lacks the potential to generate the number of electron volts required to reach the Planck constant necessary to generate the required space curvature. The LHC is able to generate Millions of electron volts, but Trillions would be required to reach the Planck constant. Another type of energy which would be required is negative energy to keep the wormhole open, but since it is not found on Earth in abundance, that we know of, it would have to be generated by the Casimir effect. This is still in its infancy relying on advancements in nano technology to be able to achieve sustained output.

I did cite that it was possible for an astronomical event such as a large CME, predicted around 2012, to overload the LHC coils and produce the eV’s necessary to produce highly exotic particles, matter and potentially some form of wormhole. However, it is unlikely that the LHC team will even operate the collider during a solar flare, since they would not risk the overload. The effects of a CME on the particle accelerator will also be lessened since it is underground.

Dimensions, and a splitting of worlds

Something about this theory sits well with me. Although it is beyond our current comprehension of the universe it may well come to pass. I feel a dimensional overlap is going to occur. How is that possible? The physics is sketchy, but utilising the many worlds theory, and the advancements in M-theory, it may occur that the membrane of two universes will collide, ours and another. The resulting collision may create a third harmonic which would be a world comprised of the physics of both dimensional universes. Instead of this third harmonic obeying the laws of Newton, and Einstein, it could obey an entirely new set of physical laws. Either way the universe which may collide with this one is within the very same room as you are now. It just happens to be that the entire population of earth is out of coherence with it, separated by a quantum event, but maybe things will change?

It is all insanely macroscopic so that it is hard for the human mind to comprehend, there is so much left to discover.

Utilising the uncertainty principle we can calculate that however absurdly insane a theory or outcome may be there is always a probability, however small that it will occur.

Now the power to influence probability, that would give us abilities indistinguishable from magic, watch this space!

Related Blogs

  • Related Blogs on black hole
  • Related Blogs on dark star
]]> http://www.berkanapath.com/radionics/160/the-physics-of-2012/feed/ 6 Bio-shield http://www.berkanapath.com/radionics/153/bio-shield/ http://www.berkanapath.com/radionics/153/bio-shield/#comments Fri, 20 Aug 2010 19:19:26 +0000 Sorynzar http://www.berkanapath.com/radionics/?p=153

My bio-shield was inspired by a sacred geometry protection seal which was designed by the Sevranx brothers. I first came across this design on Chris Gozdzik’s site “divining mind”

I feel that although the symbolic design would work, it needed to be enhanced to make it even more powerful. It has only become possible quite recently to do what I wanted with the shield, with a little help from Joseph Max of Aetheric Arts, I was able to emulate the loop antennas of early radio. This shield also became a proof of concept, which allowed me to try out the winding method so that it could be used in a field radionics device which is in the pipeline.

The design and construction of the shield employs early stealth technology in a proprietary manner, the component of which I have had sitting on a shelf for years and only decided to use fairly recently. The aim is to match the bio-electrical signature of the witness and pass an equal opposing signal around it, this would have a scalar effect cancelling out the biological signal rendering the target invisible to all that would wish them harm.

The tech for such shielding exists on warships, but is employed only to make the ship magnetically inert.

]]> http://www.berkanapath.com/radionics/153/bio-shield/feed/ 6 Royal Rife http://www.berkanapath.com/radionics/141/royal-rife/ http://www.berkanapath.com/radionics/141/royal-rife/#comments Fri, 23 Jul 2010 14:30:12 +0000 Sorynzar http://www.berkanapath.com/radionics/?p=141 Royal Rife cured cancer. Yes you read that correctly, Royal Raymond Rife cured, among many other diseases, cancer. You may be asking, “if this is true, then why have I not heard of it? Why are doctors not using Rife’ technology?” The simple truth is Doctors had heard of Royal Rife’s work in the 1930′s, they even billed his breakthrough as “the end to all disease”. Clinical trials were carried out on sixteen terminally Ill cancer patients. The team conducting the research was made up of respected doctors and pathologists, whose aim was to assess the patients over 90 days of treatment.

To everyone’s amazement fourteen of the sixteen patients were found to have been completely cured of a seemingly incurable disease. The remaining two patients were cured after a further month of treatment.

Royal Rife through his work as a highly skilled engineer had developed a device which was able to oscillate bacteria, fungus, and disease cells at their resonant frequency. The result being that the cell membranes ruptured destroying the diseased cells. This machine was to later be dubbed, the Rife machine.

A large number of medical professionals who originally supported Rife’s work, begun to deny all links with him after a few years. A few met a sticky end, labs were destroyed by arson, and research papers were spirited away. Dr Rife himself was killed by an “accidental” overdose of valium in 1971.

It is clear from these past accounts that a monster was at play. This monster took the guise of the American Medical Association. After a failed attempt to buy Rife’s technology, the carnage mentioned previously mysteriously unfolded. You need to understand that far from having your health as their vested interest, organizations such as the AMA are more concerned with keeping you sick so that they can sell you more drugs, the sale of which lines their pockets. I must mention with clarity that the lie is different at every level,. Your doctor will believe what they have been taught, and will have your best interests at heart. The lie, goes far deeper, down the corporate rabbit hole. It’s just business as they would say.

While a Rife machine is a miraculous instrument, through my technical understanding, I can see how a negative action could be created from engineering the machine to work in a different manner. If the Rife machine can destroy all manner of disease cells, parasites, viruses, in essence, organisms. It can kill any organism, even healthy ones if the operator wanted it to.

You may believe that this is why the medical profession has essentially denied all knowledge of it, because it is dangerous? Not exactly.

To cure cancer currently a patients best hope is to undergo radiation therapy, while yes, radiation therapy will destroy the cancer cells, it is not very discriminate. It will continue to destroy the beneficial cells in your body, including the lymphocytes (white blood cells) the very thing your body uses to fight infection.

While the intention may be positive, radiation therapy does more harm than good. What should be used is a different form of radiation, electromagnetic radiation. It is this radiation which the rife machine employs in the form of radio frequencies. The radio frequencies can be tuned to a greater extent, far more than techniques used in current radiation therapy.

Still after nearly 80 years, the technology that Rife developed remains lost to the vast majority of the world. It is only just starting to be rediscovered by a few daring alternative therapy practitioners, mainly in Europe where the law allows much more freedom in comparison to America. Hopefully, in time, when people become much more accepting and learnt to think outside the square thing, an end to all disease can once again become a reality. Until this golden time is upon us the Medical Mafia keeps pushing us drugs and Royal Rife’s work is but a memory. It is up to us to create a positive future, let’s start now.

I have selected a few videos for you related to Dr Rifes work. The first video shows the effect of Rife frequencies on bacteria. The second is an audio interview with Royal Rife recorded in the 50′s. I hope you enjoy.

www.youtube.com/watch?v=MD-dVXIcVng

www.youtube.com/watch?v=W4JtNQnnut8

Related Blogs

]]> http://www.berkanapath.com/radionics/141/royal-rife/feed/ 3 Manifest Through Talents http://www.berkanapath.com/radionics/133/manifest-through-talents/ http://www.berkanapath.com/radionics/133/manifest-through-talents/#comments Wed, 30 Jun 2010 15:38:27 +0000 Sorynzar http://www.berkanapath.com/radionics/?p=133

A brief musing for you today. I have been wondering if those of us with certain talents can manifest our desires much more quickly if we employ standard manifestation practices while participating in our talents.

I am gifted with artistic abilities, over the years I have started to notice a strange peculiarity. If I draw or paint a self portrait of myself in a certain place I want to be, I would find myself in that position. About one year down the line. For instance, if I draw myself with certain psychic abilities (exaggerated for artistic representation) I will receive them. I could now draw myself surrounded by wealth, and I believe I would receive it.

It has dawned on me through the research of others that when we focus, we produce PSI (psychic energy) for want of a better word. This focus coupled with an imagined outcome, visualization, will create that outcome.

Drawing or painting oneself in a certain future outcome will not necessarily work for everyone. If you are talented in a certain area, such as writing then you could sit down and write a short story, in free hand of what you want to occur, while writing see yourself in that situation, fold up the story and seal it with a wax seal, maybe even draw a simple sigil on it. In time your outcome will begin to be manifest.
A musician could write a song about their desired outcome and play it, this would be manifest. I was speaking to a gentleman on a forum who couldachieve this using a native American cedar flute.

As you can see there is a definite theme related to talents/interests and manifestation, it’s definitely worth a try.

]]> http://www.berkanapath.com/radionics/133/manifest-through-talents/feed/ 0 Sigil Magick http://www.berkanapath.com/radionics/123/sigil-magick/ http://www.berkanapath.com/radionics/123/sigil-magick/#comments Tue, 15 Jun 2010 20:03:56 +0000 Sorynzar http://www.berkanapath.com/radionics/?p=123

Sigil magick is the art of creation using nothing more than an intention drawn in the form of a sigil.

With sigil magick we can manifest our intentions with absolute precision and success. In this article, I am going to share some information with you on sigil magick and show you how to put it to use in your daily life.

To create a sigil you must first know exactly what it is you want to occur. In this example, I have chosen to draw a sigil which will help me in my financial trading.

You must now create the statement of intent, this follows a number of set rules. You should word the statement of intent as if it has already happened. This will manifest the reality to your experience. Some mages overlook this and tell you to manifest your will or desire. Manifesting the will or desire only creates more of that. In order to be successful we bring it to our present.

To show you an example, I wanted to increase my success in financial trading, so I went with the statement “I am now a successful financial trader”. This statement brings my intention into the present. It is no use writing an intention that says “I desire to be a successful financial trader”, or “I will be a successful financial trader” as these last two will never bring the intention into reality as they are focused solely on a future scenario and state that I do not have that in my reality.

It can be tricky to understand the formation of the written intention to begin with, but read it through a few times, and you should begin to see the logic.

The next step is to reduce the statement into the sigil components. There are a number of sigil magick systems around that do this, some remove the vowels and the repeating letters, some remove all repeating letters including the original. What I am going to go with is a simple system that produces good sigils. This system removes the repeating letters, but keeps the original intact. To apply this to my statement, we do the following:

I AM NOW A SUCCESSFUL FINANCIAL TRADER

We start with the first letter, I, and read along until we find repetitions of the letter I. In this case, the repetition of I resides in FINANCIAL, so we remove them, and it becomes FNANCAL.

You should now look at the second letter in the statement, and that is A. As before we go along the statement looking for the repetition of A. In this case the letter A resides on its own, and also in the words FINANCIAL and TRADER, so as before we remove them. The statement now reads the following:

I AM NOW SUCCESSFUL FNNCL TRDER

Continue to remove the repeating letters from the statement, and you will arrive at the following set of letters:

IAMNOWSUCEFLTRD

These letters will now form your sigil. When drawing your sigil you should afford a bit of creativity and make it personal to you. I have used a purple ink as this utilises the planetary energy of Jupiter, whose properties will imbue this sigil with success and wealth. You could use whatever colour ink you like.

When drawing this sigil, I took the letter’s T and I and formed the centre of the sigil, a base to hang all the other letters off of. From there I tried to make it look as good as possible and include a bit of creative flare. I am quite pleased with the results, but not all of my sigils have looked as good, they have worked just as well none the less. The next image shows you a breakdown of the sigil and where each letter resides. As you can see you can form a part of a letter from another so that the amalgamate. Try not to make them look too much like letters, instead allow yourself to use a bit of creative licence. You could use lowercase and uppercase letters even use a different alphabet if you wished.

The above image shows where each of the letters are located. This may not fall into the system of some mages, but it is this particular sigil magick system which I have found to work successfully over the years. One discrepancy is that D and C for example, could become just D as C is inside D, albeit mirrored. I like to keep the letters intact as much as possible rather than condensing them even further. However, I do make use of certain segments of a letter to make another, for example N and M in the above image.

Once you have constructed your sigil, according to tradition you should aim to charge it in some way. I generally charge the sigil using visualized intention while drawing them, I will then flip the finished drawing over and draw an invoking, or banishing pentagram depending on the type of sigil magick you are conducting, and draw the planetary symbol of the planet which is best suited to aid the outcome within the middle of the pentagram, the planet in this example being Jupiter.

Sigils will work well on their own, but to give them an extremely simple boost, place a quartz crystal over each one. This will provide a vessel for the sigil thought form and allow it to go about its business much quicker. You may also like to place the sigil and quartz onto an orgone charging pad and place under a pyramid for increased manifestation power.

I personally use this method alongside a radionics operation with the sigil on the trend plate along with a written statement in true radionics fashion. This combination is potent to say the least.

Finally, if your mother tongue is not English, then write the statement of intent in your native language and alphabet. You will find the results are much more powerful and personal to you as you have a deeper connection to the sigil.

As you can see from this article, sigil magick may appear complex at first, but once you get down to the details it is fairly easy to accomplish. The best thing about sigil magick is the power it can afford you in any situation. I still amaze myself by what I am able to achieve (world changing events) using a pen and a piece of paper. The pen really is mightier than the sword.

To discover further information on the power of the planets, and their various attributes why not sign up to the member’s area using the email form below?

After confirmation you will automatically be sent an email to your inbox with details to access your members area. Inside you will find ebooks, audios and software

on radionics, psionics, psychotronics, meditation, hypnosis and NLP, whats more it’s entirely FREE for life, what do you have to lose? Sign up today.

Related Blogs

  • Related Blogs on sigils
]]> http://www.berkanapath.com/radionics/123/sigil-magick/feed/ 6 15Hz Zapper Schematic http://www.berkanapath.com/radionics/113/15hz-zapper-schematic/ http://www.berkanapath.com/radionics/113/15hz-zapper-schematic/#comments Thu, 03 Jun 2010 10:51:25 +0000 Sorynzar http://www.berkanapath.com/radionics/?p=113

I have uploaded my own personal schematic of a 15Hz zapper circuit. I spent some time trying to find a good schematic to follow last year, but I discovered that most of them were flawed and the timing formulas did not equate their components to being the correct 15Hz output. To remedy this, I drew my own schematic, built the circuit on a breadboard and tested the output using an oscilloscope. (Yes I test my circuits, unlike some armchair engineers) It is quite difficult to get an analogue circuit dead on 15Hz due to the poor tolerance of the components. The best tolerance you can get for this particular circuit components are 1% for the resistors and 2% for the capacitors. All of this considering, I managed to get the zapper circuit tuned to 15.15Hz using the variable resistor. Without the tuning, the circuit could output anywhere from 12-20Hz.

While this circuit is labelled as a zapper circuit it does not necessarily need to be used for that purpose. I originally used this circuit to pulse a scalar coil. I found that the circuit output, while o.k for zapper functionality has a very low power output for use with a coil. To remedy this issue, I have recently redesigned the circuit with a small power amplifier included, which significantly boosts the output from the coil.

Some other things for you to consider when using the zappers are the electrodes themselves. Instead of using two hand held copper electrodes, why not create a true anode and cathode by having a Zinc and a copper electrode? The results are quite interesting.

To view a larger image of the schematic, just click on the image, and it will take you to the full size drawing.

Related Blogs

  • Related Blogs on 15Hz zapper circuit
]]> http://www.berkanapath.com/radionics/113/15hz-zapper-schematic/feed/ 56 Negative Ions & Manifestation http://www.berkanapath.com/radionics/108/negative-ions-manifestation/ http://www.berkanapath.com/radionics/108/negative-ions-manifestation/#comments Wed, 26 May 2010 16:43:17 +0000 Sorynzar http://www.berkanapath.com/radionics/?p=108

Can negative ions have a beneficial effect on manifestation? They sure can. First we will look at the health benefits of negative ions.

There exists in common supply two types of ion in our day to day world. The first which we come into contact with on a regular basis is known as a positive ion. These ions are a part of an electromagnetic field, most of this electromagnetic smog is from our household electricity supply in the region of 50-60 Hz. While in abundant supply the positive ions have no real benefit when it exceeds the quantity of negative ions. Due to the positive ions nature, it will seek to take the charge from other ions. A good source of ions is you. With all the positive ions emanating from our modern machinery it can literally drain you of your charge.

Let’s take a look at negative ions. Negative ions are found in abundance in nature, these are created by running water, wind, and lighting strikes, to name a few. It is said that negative ions can have a beneficial effect on the body, enhancing hormone production, boosting the immune system, and creating a feeling of general well being. Unless you spend a large proportion of your time outside you will generally be negative ion deficient, due to the overload of positive ions from our electronic gadgets.

To counteract and balance the excessive positive ions in the home, we can either install a small water feature, or my preferred choice an electronic negative ion generator. These come in many forms, from large, powerful industrial sized units to small rock salt lamps. The picture attached to this article shows an example of a rock salt lamp. Traditionally candles were used to power the device, but using modern technology, we can use an incandescent lamp to boost the output of negative ions. I need to do some research into whether a CFL bulb would work just as well as an incandescent. For all the negatives associated with CFL, they may be ideal for our ion application due to a large EMF output, which will convert the positive ions into negative via the rock salt.

For all of their health benefits how can negative ions help manifestation? It has been claimed that negative ions also affect our alpha brainwaves creating a much more balanced frame of mind. It is not impossible considering that an external electrical charge is affecting our internal electrical charge. This increased focus from the harmonised alpha waves is a perfect state to be in for visualisation and manifestation of intention. In this frame of mind, we will act as a perfect conduit and antenna for our intentions to be dispersed into the aether.

As you can see from this short article, negative ions are incredibly beneficial, and should be looked at in further detail. I would highly advise getting hold of a negative ion generator for the room in which you perform your intention experiments or manifestations. It would even be ideal for an office. It has been proven to boost moral and increase work rate, you can’t go wrong.

Related Blogs

]]> http://www.berkanapath.com/radionics/108/negative-ions-manifestation/feed/ 2